Carbon Tool Steel F11/F18 Stirps

• After-sales Service: Ensure Product Quality
• Warranty: 6 Months
• Type: Steel Plate
• Standard: GB, JIS
• Certification: ISO, RoHS
• Surface Treatment: Rough Turning
• Model NO.: F11/F18
• Technique: Cold Rolled
• Application: Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate
• Special Use: Cutting Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel
• Stock: Not Stock
• Transport Package: Wooden Support or Wooden Box
• Specification: 1-30mm
• Trademark: Estar
• Origin: Ningbo
• HS Code: 7225409900
• Production Capacity: 10000tons/Years

Product Description

Table 1:

Card number	Code name	Chemical into Points,%
		C	Si	Mn	P	S	Cr	Ni	Cu	Als
11Al	F11	≤0.11	≤0.06	0.30-0.55	≤0.030	≤0.030	≤0.15	≤0.30	≤0.20	0.02-0.10
18Al	F18	0.11-0.19	≤0.06	0.35-0.55	≤0.030	≤0.030	≤0.15	≤0.30	≤0.20	0.02-0.10

When the carbon content of 18A1 is 0.13% ~0.19%, the lower limit of 0.30% and the maximum limit of 0.60% when the carbon content is less than or equal to 0.12%.
Table 2:

Set.	Table 2
Card	Codena	Sample heat treatment	At the tensile	elongation gas,%
11Al	F11	920 ±20X3	295~390	>28
18Al	F18	Heat insulation 30min, air cooling	345~440	>26

Table 3:

Thick Degree		Width Degree		Seat length		Tft length
Public name size	Allow bias	Public name size	Allow bias	Public name size	Allow bias	Allow bias
25mm	+0.6 -0.8	124	+2.0 -1.5	455	+ 10     0	+ 70     0
		130

 

Equipment and workshop